基于二阶滑模算法的永磁电机直接转矩控制

针对传统直接转矩控制(DTC)方法低速控制精度差、转矩脉动大、开关频率不稳定等问题,提出了一种基于二阶滑模控制的永磁电机DTC方法。该控制方法基于二阶滑模控制原理,将传统磁链控制器与转矩控制器以滑模控制器替代,对空间电压进行矢量调制,提高了开关频率的稳定性,获得了良好的动态稳定性,改善了电机输出性能。仿真与试验结果表明,该控制方法能够有效减小电流脉动与转矩脉动,同时提高了控制系统的抗干扰能力,实现了电机的快速动态响应,具有较强的鲁棒性能。     

基于双变量预测控制的表贴式永磁同步电机直接转矩控制系统

基于电压矢量幅值和相角为变量的表贴式永磁同步电机(SPMSM)定子磁链幅值和转矩表达式,给出了9个不同幅值和相角的备选电压矢量,采用预测控制计算得出施加不同电压矢量下一时刻的定子磁链幅值和转矩值,建立了基于磁链和转矩误差的目标函数,并选择使目标函数最小的电压矢量为作为下一时刻施加的最优电压矢量。仿真结果表明:在双变量预测控制下,SPMSM直接转矩控制系统运行良好,定子磁链轨迹为理想圆,磁链和转矩均符合控制要求,转速跟踪良好,定子电流波形正弦。进一步对比分析表明:与开关表和固定电压矢量选择策略相比,双变量预测控制能显著减小转矩和磁链脉动。与开关表相比,转矩脉动均方根误差降低了62.92%,磁链脉动均方根误差降低了45.05%,评价函数均值降低了60.30%；与固定电压矢量选择策略相比,转矩脉动均方根误差降低了22.40%,磁链脉动均方根误差降低了3.85%,评价函数均值降低了15.93%。     

Distributed intelligent self-organized mission planning of multi-UAV for dynamic targets cooperative search-attack

This article studies the cooperative search-attack mission problem with dynamic targets and threats, and presents a Distributed Intelligent Self-Organized Mission Planning (DISOMP) algorithm for multiple Unmanned Aerial Vehicles (multi-UAV). The DISOMP algorithm can be divided into four modules: a search module designed based on the distributed Ant Colony Optimization (ACO) algorithm, an attack module designed based on the Parallel Approach (PA) scheme, a threat avoidance module designed based on the Dubins Curve (DC) and a communication module designed for information exchange among the multi-UAV system and the dynamic environment. A series of simulations of multi-UAV searching and attacking the moving targets are carried out, in which the search-attack mission completeness, execution efficiency and system suitability of the DISOMP algorithm are analyzed. The simulation results exhibit that the DISOMP algorithm based on online distributed down-top strategy is characterized by good flexibility, scalability and adaptability, in the dynamic targets searching and attacking problem.     

WSO-UV project

During last three decades, astronomers have enjoyed continuous access to the 100–300 nm ultraviolet (UV) spectral range where the resonance transitions of the most abundant atoms and ions (at temperatures between 3000 and 300 000 K) reside. This UV range is not accessible from ground-based facilities. The successful International Ultraviolet Explorer (IUE) observatory, the Russian ASTRON mission and successor instruments such as the Galaxy Evolution Explorer (GALEX) mission or the COS and STIS spectrographs on-board the Hubble Space Telescope (HST) prove the major impact of observations in the UV wavelength range in modern astronomy. Future access to space-based observatories is expected to be very limited. For the next decade, the post-HST era, the World Space Observatory – Ultraviolet (WSO–UV) will be the only 2-m class UV telescope with capabilities similar to the HST. WSO–UV will be equipped with instruments for imaging and spectroscopy and it will be a facility dedicated, full-time, to UV astronomy. In this article, we briefly outline the current status of the WSO–UV mission and the science management plan.     

有翼再入飞行器气动外形集成设计优化

气动外形设计是有翼再入飞行器（RV-W）的关键技术之一。分析了气动参数对再入飞行性能的影响,探讨了有翼再入飞行器气动外形设计的规律和准则。基于上述设计准则,以类X-37B飞行器为研究对象,集成几何参数化建模、气动力、气动热、热防护等学科快速分析方法,采用多学科设计优化方法,以最优气动特性为目标对飞行器气动外形进行了优化;得到优化气动外形后,对飞行器热防护系统（TPS）进行了轻量化设计优化。结果表明,优化外形的气动特性相比初始外形得到了较大的提升,设计优化得到的热防护系统重量占比（8.7%）优于同类飞行器的热防护系统重量占比统计数据,说明了本文有翼再入飞行器气动外形集成设计优化方法的有效性,可为同类飞行器提供参考。     

可重复使用热防护材料应用与研究进展

可重复使用热防护系统是为高速重复使用飞行器而发展的关键性技术,涵盖了地球大气环境及非地球大气环境下的弹道式再入、高马赫数巡航等应用场景。根据现有高马赫数飞行器热防护现状,对高马赫数飞行器的主要热防护系统类型、特点和使用场景进行了简要介绍。在此基础上,结合国外里程碑式可重复使用飞行器（X-15、SR-71、航天飞机、X-33、X-37B、Spaceliner等）,梳理了可重复使用热防护材料的应用与研究进展,论述了代表性可重复使用热防护材料的发展、性能、研制进度、特点及应用前景。对国外在可重复使用热防护材料研制中的设计及发展思路,以及所存在的主要问题进行了总结归纳,为可重复使用热防护材料未来的发展提供了思路。     

湍流控制屏声学校准及校准精度影响因素

湍流控制屏（TCS）是航空发动机风扇噪声试验必备的试验设施。由于湍流控制屏的作用,风扇前传噪声向远场传播时会产生传递损失。通过对湍流控制屏的声学校准,可以获取湍流控制屏的声学修正量,从而实现对风扇前传噪声的修正。本文结合实际工程应用条件,分析了湍流控制屏重复安装的位置精度、校准声源重复性、稳定性、校准声源位置偏差、温湿度修正等因素对湍流控制屏声学修正量精度的影响;结合上述影响因素,对湍流控制屏160 Hz~40 kHz的声学修正量的特征进行分析,总结工程应用中湍流控制屏高精度声学校准的注意事项,提出湍流控制屏的声学校准应包含测量不确定度。     

基于模型的装备维修性设计控制技术

伴随数字化设计方法日趋成熟,飞机装备维修性设计面临如何与三维数字化设计环境下功能性能设计同步的难题。对比分析了数字化环境维修性设计与传统维修性设计的主要差别,提出了基于飞机装备数字化设计环境维修性设计流程,研究了维修性设计参数的表达模型以及维修性参数信息在三维设计数字环境中的转化、集成与利用方式。基于图论和网络节点框图,提出了一种以节点网络图、单节点维修时间模型、维修过程时间模型为表征的飞机装备维修性设计与控制方法。经实例验证,提出的这套基于数字模型的维修性设计技术,对装备在数字化设计环境下同步开展维修性设计具有一定的工程指导价值。     

导流槽构型对火箭起飞时流场和声场的影响

为了研究四喷管运载火箭起飞时火箭周围噪声环境问题,建立燃气/空气双组分的可压缩流动模型,采用2阶Roe格式、SAS(scale-adaptive simulation)湍流模型和声学类比积分法Ffowcs-Williams Hawkings(FW-H)求解三维Navier-Stokes方程。以单机火箭的噪声问题为对象开展数值模拟,并将噪声数值计算结果与试验数据对比,误差在3dB以内(相对误差小于1.6%),验证预测噪声方法的有效性,进而研究四喷管运载火箭起飞阶段采用不同导流槽构型对箭体舱段区域噪声环境的影响,结果表明:在相同噪声接收点处,单侧导流槽对应的总声压级比双侧导流槽大,两者的总声压级(OASPL)之差最大为10.7dB。另外,当采用单侧导流槽时,沿周向接收点的噪声总声压相对单侧导流槽中心截面呈对称分布,而且沿导流出口方向逐渐增大。所建立的噪声数值方法为大推力捆绑运载火箭舱段的噪声环境预测及其控制提供一定参考。     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.